"/>

FREE SHIPPING ON ALL BLINDS WITHIN 48 CONTINENTAL U.S.

SOMFY Power Supply 24V DC 10 Amp 240 Watt Industrial Din Rail Mount Transformer (MPN #9011995/NDR-240-24)

SOMFY Power Supply 24V DC 10 Amp 240 Watt Industrial Din Rail Mount Transformer (MPN #9011995/NDR-240-24)

Write a Review
$399.63

SOMFY POWER SUPPLY 24V 10 AMP 240 WATT INDUSTRIAL DIN RAIL (NDR-240-24) (MPN #9011995)
SOMFY 24 VOLT DC 10 AMP DIN RAIL MOUNT TRANSFORMER (MPN #9011995) HAS BEEN DISCONTINUED AND REPLACED BY NDR-240-24

THE SOMFY 110 TO 240 VOLT  24 VOLT DC 10 AMP DIN RAIL MOUNT TRANSFORMER WILL POWER UP 6  R28  OR 5 ST30 SONESSE MOTORS AND IS DESIGNED FOR A LIFETIME OF WORRY FREE PERFORMANCE. WIRE IN YOUR BLIND AND SHADE MOTORS WITH OUR DIN RAIL MOUNT TRANSFORMER.

◼︎ SPRINGBLINDS INSTALLATION & PROGRAMMING GUIDES: CLICK HERE
◼︎ SOMFY INSTALLATION & PROGRAMMING GUIDES: CLICK HERE

◼︎ DESCRIPTION

NDR-240 IS ONE ECONOMICAL SLIM 240W DIN RAIL POWER SUPPLY SERIES, ADAPT TO BE INSTALLED ON TS-35/7.5 OR TS-35/15 MOUNTING RAILS. THE BODY IS DESIGNED 63MM IN WIDTH, WHICH ALLOWS SPACE SAVING INSIDE THE CABINETS. THE ENTIRE SERIES ADOPTS THE FULL RANGE AC INPUT FROM 90VAC TO 264VAC AND CONFORMS TO BS EN/EN61000-3-2, THE NORM THE EUROPEAN UNION REGULATES FOR HARMONIC CURRENT.

NDR-240 IS DESIGNED WITH METAL HOUSING THAT ENHANCES THE UNIT'S POWER DISSIPATION. WITH WORKING EFFICIENCY UP TO 90%, THE ENTIRE SERIES CAN OPERATE AT THE AMBIENT TEMPERATURE BETWEEN -20°C AND 70°C UNDER AIR CONVECTION. IT IS EQUIPPED WITH CONSTANT CURRENT MODE FOR OVER-LOAD PROTECTION, FITTING VARIOUS INDUCTIVE OR CAPACITIVE APPLICATIONS. THE COMPLETE PROTECTION FUNCTIONS AND RELEVANT CERTIFICATES FOR INDUSTRIAL CONTROL APPARATUS (UL508, TUV BS EN/EN62368-1, AND ETC.) MAKE NDR-240 A VERY COMPETITIVE POWER SUPPLY SOLUTION FOR INDUSTRIAL APPLICATIONS. 

◼︎ BENEFITS

  • UNIVERSAL AC INPUT / FULL RANGE
  • BUILT IN ACTIVE PFC FUNCTION
  • PROTECTIONS: SHORT CIRCUIT / OVERLOAD / OVER VOLTAGE / OVER TEMPERATURE
  • COOLING BY FREE AIR CONVECTION
  • CAN BE INSTALLED ON DIN RAIL TS-35/7.5 OR 15
  • UL 508(INDUSTRIAL CONTROL EQUIPMENT)APPROVED
  • LED INDICATOR FOR POWER ON
  • 100% FULL LOAD BURN-IN TEST
  • FIXED SWITCHING FREQUENCY AT 100KHZ
  • 3 YEARS WARRANTY

◼︎ DIMENSION AND WEIGHT

  • DIMENSIONS: 2.48 x 4.90 x 4.47 INCHES
  • ITEM WEIGHT: 35 OZ

◼︎ SPECIFICATIONS 

  • UNIVERSAL AC INPUT / FULL RANGE
  • BUILT-IN ACTIVE PFC FUNCTION
  • PROTECTIONS: SHORT CIRCUIT / OVERLOAD / OVER VOLTAGE / OVER TEMPERATURE 
  • COOLING BY FREE AIR CONVECTION
  • CAN BE INSTALLED ON DIN RAIL TS-35/7.5 OR 15
  • UL 508 (INDUSTRIAL CONTROL EQUIPMENT) APPROVED
  • BS EN/EN61000-6-2(BS EN/EN50082-2) INDUSTRIAL IMMUNITY LEVEL 
  • 100% FULL LOAD BURN-IN TEST
  • 3 YEARS WARRANTY 

◼︎ APPLICATION

ROLLING SHUTTER , EXTERIOR SOLAR SCREENS , AWNING , BUILDING MANAGEMENT , INTERIOR WINDOW COVERINGS/BLINDS 

◼︎ ABOUT SPRINGBLINDS
FACTORY DIRECT & FAST PRODUCTS | HIGH QUALITY & REASONABLE PRICE | MADE IN USA
FREE SHIPPING (CONTINENTAL US ONLY) | CHILD SAFETY PRODUCTS | ECO-FRIENDLY WINDOW TREATMENTSabout-springblinds.jpg

This product hasn't received any reviews yet. Be the first to review this product!
Write a Review

To get started, first choose the window covering you are interested in. When measuring to fit blinds or shades to your windows, it is important to remember a few key things. Decide if you want an inside mount or an outside mount before you begin the measuring process. A steel measuring tape is much more accurate than cloth measuring tape. Always measure to the nearest 1/8 inch. Don't round to a half or whole inch. Be careful about transposing measurements. Be sure to always have width and height clearly marked. And remember: always put your width measurement first, and height last (W x H). Then read our Measuring Guide.

'