"/>

FREE SHIPPING ON ALL BLINDS WITHIN 48 CONTINENTAL U.S.

SOMFY Power Supply 12V DC 10 Amp Din Rail Mount Transformer (MPN #9014246) Somfy power supply for somfy blinds

SOMFY Power Supply 12V DC 10 Amp Din Rail Mount Transformer (MPN #9014246)

Write a Review
$206.63

SOMFY POWER SUPPLY 12V DC 10 AMP DIN RAIL MOUNT TRANSFORMER (MPN #9014246)

◼︎ SPRINGBLINDS INSTALLATION & PROGRAMMING GUIDES: CLICK HERE
◼︎ SOMFY INSTALLATION & PROGRAMMING GUIDES: CLICK HERE

◼︎ DESCRIPTION

SOMFY 12 VOLT DC 10 AMP DIN RAIL MOUNT TRANSFORMER WILL POWER ALL SOMFY 12 VOLT MOTORS INCUDING R28, CL32 CORD LIFT MOTOR, TILT MOTOR.

◼︎ DIMENSION AND WEIGHT

  • DIMENSIONS: 2.6 x 4.9 x 3.9 INCHES
  • ITEM WEIGHT: 28 OZ

◼︎ SPECIFICATIONS 

  • OUTPUT VOLTAGE: 12V
  • APPROX. WATTAGE: 120W
  • PROTECTIONS: SHORT CIRCUIT / OVERLOAD / OVER VOLTAGE / OVER TEMPERATURE
  • CAN BE INSTALLED ON DIN RAIL TS35 / 7.5 OR 15
  • WARRANTY: 3 YEARS WARRANTY
  • AC INPUT VOLTAGE RANGE: 90~132/180~264VAC SELECTABLE BY SWITCH
  • AC INRUSH CURRENT (230VAC): 40A
  • DC ADJUSTMENT RANGE: 12V: 12~14V, 24V: 24~28V, 48V: 48~53V%
  • OVERLOAD PROTECTION: 105%~150% CONSTANT CURRENT LIMITING, AUTO-RECOVERY
  • OVER VOLTAGE PROTECTION RANGE: 115%~142% RATED OUTPUT VOLTAGE
  • OVER VOLTAGE PROTECTION TYPE: SHUT OFF, AC RECYCLE TO RE-START
  • OVER TEMP. PROTECTION: SHUT DOWN OUTPUT VOLTAGE, RECOVERS AUTOMATICALLY AFTER TEMPERATURE GOES DOWN
  • WITHSTAND VOLTAGE: I/P-O/P: 3KVAC, I/P-FG: 1.5KVAC, O/P-FG: 0.5KVAC, 1 MINUTE
  • WORKING TEMPERATURE: -10~+60°C
  • SAFETY STANDARDS: UL508, TUV EN60950-1, UL60950-1 APPROVED
  • EMC STANDARDS: EN55022 CLASS B, EN61000-3-2,3, EN61000-4-2,3,4,5,6,8,11, EN61000-6-2 HEAVY INDUSTRY LEVEL
  • CONNECTION: I/P: 3 POLES, O/P: 4 POLES SCREW DIN TERMINAL

◼︎ APPLICATION

ROLLING SHUTTER, EXTERIOR SOLAR SCREENS, AWNING, BUILDING MANAGEMENT, INTERIOR WINDOW COVERINGS/BLINDS 

◼︎ ABOUT SPRINGBLINDS
FACTORY DIRECT & FAST PRODUCTS | HIGH QUALITY & REASONABLE PRICE | MADE IN USA
FREE SHIPPING (CONTINENTAL US ONLY) | CHILD SAFETY PRODUCTS | ECO-FRIENDLY WINDOW TREATMENTSabout-springblinds.jpg

This product hasn't received any reviews yet. Be the first to review this product!
Write a Review

To get started, first choose the window covering you are interested in. When measuring to fit blinds or shades to your windows, it is important to remember a few key things. Decide if you want an inside mount or an outside mount before you begin the measuring process. A steel measuring tape is much more accurate than cloth measuring tape. Always measure to the nearest 1/8 inch. Don't round to a half or whole inch. Be careful about transposing measurements. Be sure to always have width and height clearly marked. And remember: always put your width measurement first, and height last (W x H). Then read our Measuring Guide.

'